Riello NetMan 204 Service Manual

- 10 - Modbus The UPS status can be monitored by means of the standard network protocol MODBUS TCP/IP. This service is always active on the TCP port

- 11 - UPS VALUES AND EVENTS HISTORY LOG ARCHIVE NetMan 204 records the UPS values (Datalog) and events (Eventlog) in a history log archive. The data

- 12 - ENVIRONMENTAL SENSORS (OPTIONAL) Is possibile to connect to NetMan 204 the environmental sensors for monitoring temperature, humidity and di

- 13 - CONFIGURATION OVERVIEW NetMan 204 can be configured via USB, via SSH or via HTTPS. NetMan204 comes provided as factory default with DHCP en

- 14 - Configuration via USB To configure NetMan 204 via USB it is necessary to: • connect, with the USB cable provided, the micro-USB port with the

- 15 - CONFIGURATION VIA SSH OR USB: MENU DESCRIPTION In order to make a new configuration effective, it is necessary to save it in the flash memory

- 16 - Setup menu The main configuration menu displays a screen like the following: /------------------------/ / Setup / /

- 17 - Here is a graphical representation of the setup menu and submenus:

- 18 - IP config menu /------------------------/ / IP config / /------------------------/ Hostname...:ups_server

- 19 - Time setting menu /------------------------/ / Time setting / /------------------------/ Set time...:<--

- 2 - INTRODUCTION Thank you for choosing our product. The accessories described in this manual are of the highest quality, carefully designed and

- 20 - Scheduled NTP menu /------------------------/ / Scheduled NTP / /------------------------/ NTP server...:time_server

- 21 - Services 1 menu /------------------------/ / Services 1 / /------------------------/ SNMPV1 config..:<-- SN

- 22 - SNMPv1 config menu /------------------------/ / SNMPV1 config / /------------------------/ Trap receiver 1:powernetgua

- 23 - Email config menu /------------------------/ / Email config / /------------------------/ Email address 1:myself@mycom

- 24 - Email logic menu /------------------------/ / Email logic / /------------------------/ Email 1 E

- 25 - Miscellaneous menu /------------------------/ / Miscellaneous / /------------------------/ Log frequency..:5 sec

- 26 - Activation 1 menu /------------------------/ / Activation 1 / /------------------------/ Enable SSH...:[ON/off]<

- 27 - Wake-On-LAN address menu /------------------------/ / Wake-on-LAN address / /------------------------/ MAC Address 1..:00-12

- 28 - Activation 2 menu /------------------------/ / Activation 2 / /------------------------/ Enable Serial N:[ON/off]<

- 29 - Example: how to connect a Temperature sensor, a Humidity & Temperature sensor and a Digital I/O & Temperature sensor in exactly this o

- 3 - ENVIRONMENTAL PROTECTION Our company devotes abundant resources to analysing environmental aspects in the development of its products. All our

- 30 - I/O Sensors menu /------------------------/ / Output / /------------------------/ Output

- 31 - Security menu /------------------------/ / Security / /------------------------/ UDP Password...:<-- UDP

- 32 - Pressing the ENTER key corresponding to the “Firewall” command displays a screen like the one shown below. /------------------------/

- 33 - Save and load menu /------------------------/ / Save and load / /------------------------/ Save changes...:<--

- 34 - FIRMWARE UPGRADE The NetMan 204 firmware can be updated via HTTP or via FTP. FIRMWARE UPGRADE VIA HTTP Connect via HTTP to the NetMan 204 to

- 35 - SNMPV3 CONFIGURATION For configuring SNMPv3 access, is necessary to edit snmp.conf. This file can be downloaded and uploaded with FTP with us

- 36 - <securityType> is the minimum security level that must be used to gain access to this access right. Possible values are: • noauthnopriv

- 37 - MODBUS TCP/IP PROTOCOL This service is always active on the TCP port 502. The supported function are listed below, together with the accessib

- 38 - REGISTER(1) UPS - MEASUREMENTS UNIT NUMBER ADDRESS 9÷11 8÷10 12 11 Input mains star voltage V1 V 13 12 Input mains star voltage V2 V 14 1

- 39 - REGISTER(1) UPS – NOMINAL DATA UNIT NUMBER ADDRESS 73÷77 72÷76 78 77 Output nominal voltage (star) V 79 78 Output nominal frequency 0.1*Hz

- 4 - CONTENTS DESCRIPTION ____________________________________________________ 6 OVERVIEW ______________________________________________________

- 40 - REGISTER(1) SPECIAL FLAGS (SENTR UPS) (2) UNIT NUMBER ADDRESS 121 120 Byte 1 of “s = xx..” code / Byte 2 of “s = ..xx” code Flag 122 121 Byt

- 41 - TECHNICAL DATA NETWORK CABLE To connect the device to the Ethernet (10Base-T) or Fast Ethernet (100Base-T) network, a UTP (Unshielded Twisted

0MNACCSA4ENUA

- 5 - Time setting menu _______________________________________________________ 19 Scheduled NTP menu _____________________________________________

- 6 - DESCRIPTION OVERVIEW NetMan 204 is a device that allows UPS management through a LAN (Local Area Network); the accessory supports all the mai

- 7 - FRONT PANEL A: Network port B: Led C: Reset button D: Micro-USB port E: Serial port Network port NetMan 204 connects to 10/100 Mb

- 8 - Reset button The reset button allows to restart the NetMan204 or to load a default configuration with a predefined static IP address. To res

- 9 - NETWORK SERVICES NetMan 204 implements a series of services based on the main network protocols. These services can be activated or deactivated