Riello 40 F3 Service Manual download pdf (Page 6)

C6501000 F3-F5 I-O manual Rev4_3 5

OIL BURNER COMPONENTS IDENTIFICATION

1312

STANDARD RIELLO OIL BURNER MODELS 40 F3 & 40 F5 BURNER KEY COMPONENTS

1. 530 SE/C INTEGRATED PRIMARY CONTROL 7. ELECTRONIC AIR SHUTTER ASSY.

2. PRIMARY CONTROL SUB-BASE 8. WIRE HARNESS FOR AIR SHUTTER

3. FUEL UNIT (PUMP) 9. COMBUSTION HEAD WITH DRAWER ASSY.

4. PSC MOTOR 10. SEMI FLANGE 2 PIECES

5. CAPACITOR 11. UNIVERSAL MOUNTING FLANGE & GASKET

6. AIR ADJUSTMENT AND SHUTTER

12. AIR TUBE COVER PLATE

13 PUMP VALVE (COIL)

*PLEASE READ THE MANUAL FOR SPECIFIC INFORMATION ON COMPONENTS

**IF BURNER IS AN OEM BURNER KEY COMPONENTS MAY DIFFER SLIGHTLY

BURNER SERIAL NUMBER IDENTIFICATION

The Riello 15 character serial number, example, 99 A 8511111 00025, is identified as follows:

99 = last two digits of the year of manufacture; A = BI-week of manufacture; 8511111 = burner product code;

00025 = increment of 1 for each burner produced – specific to product code – reset to zero each January 1

(99) (A) 8511111 00025

INITIAL SET-UP

A) Remove burner and air tube from cartons. Check parts list (inside cover) to ensure all parts are present.

B) Remove burner cover by loosing the three screws securing it. Remove control box and air tube cover (see

page 8).

C) Remove drawer assembly from air tube, insert nozzle and set Turbulator adjustment for specific input

required (see pages 8 & 9), then set aside.

D) Mount air tube to burner chassis. (see next page)

Year of manufacture BI-week of manufacture

Burner product code

Sequence

1 2 3 4 5 6 7 8 9 10 11 ... 24 25

No comments

Riello 40 F3 Service Manual Page 6